msc-102c_1

RS-232/422/485 PCI Serial Cards

Availability: In stock

msc-102c_1

MSC-102C

2-Port RS-232/422/485 PCI Card

  • Provides dual RS-232/422/485/ Ports over PCI
  • PCI 32-bit, PIO Mode with 133MB/S Bandwidth
  • Supports RS-232, RS-422/485 4-wire and 2-wire Modes
  • Modes of Each Port can be Set Independently
  • Supports RS-485 Auto Transceiver Turn Around by Unique Featured ATTA™ Hardware
  • PCI IRQ Sharing Feature Eliminates IRQ Conflicts
  • Supports Dual DB9-male Connectors
  • Supports Optional DB9F to 5-pin Terminal Adapter
  • Supports Baud Rate up to 921.6Kpbs
Download

MSC-102C-SI

2-Port RS-232/422/485 PCI Card w/ Surge & Isolation

  • Provides dual RS-232/422/485/ Ports over PCI Slot
  • PCI 32-bit, PIO Mode with 133MB/S Bandwidth
  • Supports RS-232, RS-422/485 4-wire and 2-wire Modes
  • Modes of Each Port can be Set Independently
  • Supports RS-485 Auto Transceiver Turn Around by Unique Featured ATTA™ Hardware
  • PCI IRQ Sharing Feature Eliminates IRQ Conflicts
  • Supports Dual DB9-male Connectors
  • Supports Optional DB9F to 5-pin Terminal Adapter
  • Supports Baud Rate up to 921.6Kpbs
  • Supports 2500Vrms Isolation and 15KV ESD Protection
Download
msc-102c_1

MSC-104CL

4-Port RS-232/422/485 Universal PCI Serial Card

  • Fully PCI Bus 2.3 and PCI Power Management 1.1 Compliant
  • Supports 4 RS232/422/485 serial ports over a PCI Slot
  • Supports low profile form factor by an optional short bracket
  • Independent mode-selection DIP switch pins for each port
  • Supports RS232, RS422, RS485-4wire and RS485-2wire modes
  • ±15kV IEC1000-4-2 ESD Protection for RS-232 I/O’s
  • Supports both 3.3V and 5V PCI Slots
  • 256-byte deep FIFO per transmitter and receiver
  • Supports 5V or 12V over DB44 connector pins, the Fan out Octopus Cable Supplies it to DB9 Connectors
  • Software/Hardware Flow Control & Xoff Re-Transmit Function
Download
custom contents goes here
Top